2013년 2월 24일 일요일

3DMark Fire Strike LN2 result

 







 
 
HW BOT 인증
 
퓨처마크 인증
 


-75c / GPU 1580Mhz (1630mV)  / MEM 2000 (+1880mV) / PLL (+100mV) /  OK

GPU 1580이상에서 메모리 클럭 1900넘기면 실행중 회색줄무니가 있는 화면이 나오면서 벤치Stop...3DMark Fire Strilke의 경우 메모리 클럭에 따라 점수이득 차이가 크므로 GPU 1580Mh로 고정하여 진행함. (메모리 클럭이 높아야 combine점수가 잘나옴)


2013년 2월 22일 금요일

[Volt Bypass Guide] GTX 680 Lightning MSI Afterburner

Step 1: download the unlocked LN2 BIOS (click)
Step 2: flash the bios
  • Extract the nvflash files to C:\
  • Save the BIOS file to C:\
  • Open elevated cmd window (hit start button, type “cmd”, right click cmd icon, run as administrator)
  • Change directory to C:\ (type ” cd C:\ ” )
  • Optional: type “nvflash –protectoff” then hit enter (turns off any error msg that may result from software write protection)
  • Backup original bios (important!): Type ” nvflash -b backup.rom ” and a copy of your bios will be saved to the nvflash directory
  • Type “nvflash -4 -5 -6 Yourbios.rom” (replace yourbios.rom with the actual file name)
  • Wait for it to finish
  • Reboot
  • Optional, but probably necessary: re-install drivers

Bypassing the voltage limitation – the actual overclocking


When you are done with that, we can move on and start with the actual overclocking. In order to bypass the voltage limitations and increase them beyond the +93mV, you will need two software applications: MSI Afterburner 2.2.3 (download and Artmoney (download). Make sure you are running both AB and AM as administrator! Okay, here we go.
Step 3: Set AB vCore to +93, hit apply, make sure it’s still at +93
Step 4: Go to AM, search for integer with value 93; it should give you several thousand results.
Step 5: Go back to AB, change vCore to like +70, hit apply, then see what vCore it changes it to (probably +68)
Step 6: Go back to AM, filter your previous search. Hit filter, then enter in value 68 (or whatever value is currently displayed in vCore of AB. Hit enter.
Step 7: Add the one with the address “00449000″ – this value controls your offset!
Step 8: Then you can enter in all the info in the ‘edit address’ window. For example, I entered in a value of 180, which will give me an offset of +143 in AB.
Step 9: Set your clocks in AB and you are ready to GO!

Important: Remember to Check the “Freeze” box. Also please remember to be careful using this method to control the voltages. It is a memory hack … which is and always will be a hack, meaning there are always risks involved. Be cautious! Good luck!